Frigidaire FAA062P7A11 user manual download (Page 5 of 8)

Languages: English
Pages:8
You can view the full version and download it in PDF format.
Page 5 of 8
Using Air Conditioner
NOTE:
If the air conditioner
is turned
off,
wait 3 minutes before restarting. This allows
pressure
inside
the
compressor
and
equalize.
Failure to follow these instructions
may be harmful to your unit.
To begin
operating
the air conditioner,
follow
these steps:
1. Set the thermostat
to the highest number
(coldest
or cooler
setting).
2. Set the selector
control to the highest COOL setting.
3. Adjust the louvers for comfortable
air flow (see Air Directional
Louvers).
4. Once the room has cooled, adjust the thermostat
to the setting you find most comfortable.
Review
the "Air Conditioner
Features" section for other settings.
Ai r
Conditioner
Featu res
the
co,,troJe
featured/Y! th/L_
manualare
repreeentat/ve
ofmany
ava//ab/e
mode/e.
Yourmode/
may offer
s/ightly different
features.
f.
TEMPERATURE
OFF
Thermostat
The thermostat
is used to set the desired
room temperature
when the unit is being operated
in the "COOL
MODE".
To set the desired room temperature,
rotate the thermostat
switch to the desired setting. After
the set temperatu re is achieved the thermostat
will automatically
start and stop the compressor
in order to maintain the desired set temperature.
Rotate
the thermostat
selector
clockwise
for higher cool settings.
Higher
cool settings
will
provide lower room temperature.
Rotate the thermostat
selector
counter clockwise
for lower cool settings.
Lower cool settings
will provide higher room temperature.
Cool
Mode
The desired cool setting is selected by rotating the knob to the right to the appropriate
location.
"hi cool"
has maximum
cooling
effect and airflow.
'1o coor'
has minimum
cooling effect and airflow.
"reed cool"
has the intermediate
cooling effect and airflow.
Note:
tf your unit is equipped
with a vent handle, keep it closed for maximum
efficiency.
Fan
Mode
Rotate the knob to the left to select your choice of fan speeds
for air circulation.
Note: When selecting a fan speed, the compressor
will not run. On models with a vent control,
this mode can be used to remove stale air from the room, or to draw fresh air into the room.
Check the section
'Additional
Things You Should
Know'.
_)
Please
always
wait
3 minutes
when
turning
unit
off and then
on again,
and when
changing
from
cool
to fan
/_\
and
back
to cool.
This
prevents
the compressor
from
overheating
and
possible
circuit
breaker
tripping.
,L_L&
Sample