Frigidaire FAA062P7A11 user manual download (Page 4 of 8)

Languages: English
Pages:8
You can view the full version and download it in PDF format.
Page 4 of 8
Important
Safety
Instructions
The
power
supply
cord
with
this air conditioner
contains
a current
de-
tection
device
designed
to reduce
the risk
of fire.
Please
refer
to the
section
'Operation
of
Current
Device' for details.
In the event that the power supply
cord is
damaged,
it cannot
be repaired
it must be
replaced with a cord from the Product Manu-
facturer.
Avoid fire hazard or electric
shock.
Do not use an extension
cord or an
adaptor plug. Do not remove any prong from
the power cord.
Grounding
type wall
receptacle
/6o
net,
under
any
cumstances,
cut,
re-!
move,
or bypass
the
i
g
ro
undi._n._g_.p
ro
ng_______;__..j/
Power supply
cord
_
with 3-prong
grounding
'_
plug and current
detection
device
Read all instructions
before using
this
air
conditioner.
For Your
Safety
Do not store or use gasolineor other flammable vapors and liquids inthe vicinit
other appliance. Read product labels for flammability and other warnings.
/of
this or any
[_
Prevent
Accidents
To reduce the risk of fire, electrical shock, or injury to persons when using your air conditioner,
follow basic precautions,
including the following:
Be sure the electrical
service is adequate for the model you have chosen. This information
can be found on the serial plate, which is located on the side of the cabinet and behind the
grille.
If the air conditioner
is to be installed
in a window,
you will probably
want
to clean
both
sides of the glass first.
If the window
is a triple-track
type with a screen
panel included,
remove
the screen completely
before installation.
Be sure the air conditioner
has been securely
and correctly
installed
according
to the
separate
installation
instructions
provided
with
this manual.
Save this manual
and the
installation
instructions
for possible
future use in removing
or reinstalling
this unit.
When handling
the air conditioner
be careful
to avoid cuts from sharp metal fins on front
and rear coils.
Electrical
Information
The complete
electrical
rating
of your new room air conditioner
is stated on the serial plate.
Refer to the rating when
checking the electrical
requirements.
Be sure the air conditioner
is properly
grounded.
To minimize
shock
and fire
hazards,
proper
grounding
is important.
The power cord is equipped
with a three-prong
grounding
plug for protection
against shock
hazards.
Your air conditioner
must be used in a properly
grounded
wall
receptacle.
If the wall
receptacle
you intend
to use is not adequately
grounded
or protected
by a time delay
fuse or circuit
breaker,
have a qualified
electrician
install the proper
receptacle.
Do
not run air conditioner
with outside
protective
cover
in place.
This could
result
in
mechanical
damage
within the air conditioner.
Do not use an extension
cord or an adapter
plug.
READ
THIS
SECTION
BEFORE
ATTEMPTING
TO OPERATE
AIR CONDITIONER.
Operation
of Current
Device
Plug
in &
press
RESET
The
power supply cord contains
a current device that senses damage
to the power cord. To
test your power supply cord do the following:
1. Plug in the Air Conditioner.
2. The power supply
cord will have TWO buttons on the plug head.
Press the TEST button.
You will notice a click as the RESET button pops out.
3. Press the RESET button. Again you will notice a click as the button engages.
4. The power
supply cord is now supplying
electricity
to the unit. (On some products
this is
also indicated
by a light on the plug head).
NOTES:
Do not use this device to turn the unit on or off.
Always make sure the RESET button is pushed in for correct operation.
The power supply cord must be replaced
if it fails to reset when either the TEST button is
pushed,
or it cannot be reset. A new one can be obtained from the product manufacturer.
If power
supply
cord is damaged,
it CANNOT
be repaired.
It MUST
be replaced
by one
obtained
from the product
manufacturer.
Sample