Zenith TVSC0902 user manual download (Page 20 of 32)

Languages: English
Pages:32
You can view the full version and download it in PDF format.
Page 20 of 32
Make sure:
• TV/VCR
power
must be turned
on.
PLAYBACK
If the erase-protection
tab has been removed,
the
TV/VCR
will start playback
automatically.
2) Press it again and the
TV/VCR
will now search
in super high speed (in the LP
/
SLP modes
only).
NOTE:
Tapes recorded
in the SP or LP mode
will display a noise bar on the TV screen
and
the picture
may appear
in Black and White.
This is normal.
3) Press
the
PLAY button to return to normal speed.
Press the PLAY button•
/
Press the STOP
button
when playback
is completed.
• Tracking
adjustment
will be set automatically
(Digital
Tracking
function)
when you start
playback.
However
when playing prerecorded
tapes or
tapes
recorded
on units other than your own,
noise lines (black and white streaks)
may
appear
on the playback
picture.
If this occurs,
you can adjust
the
tracking
control manually
by
pressing
the CHANNEL
UP or DOWN
button
until the streaks
disappear.
To return to the DTR
function,
stop the tape once and start playback
again.
This feature
is very useful
in finding or skipping
over a particular
scene on a tape. In this mode,
the sound will be muted.
1) You may view a video
tape
at a high speed in
either a forward
or reverse
direction
by
pressing
the RFWD
or REW button. (in the SP
/
LP
/
SLP modes)•
You can view a still picture
on the TV (Still mode)
screen
during
playback.
Press the PAUSE/STILL
button
during playback.
Tapes recorded
in the
SLP mode will show the least amount
of lines.
Press the PLAY button to return to playback.
NOTE:
Usually there will be video "noise"
lines (black
and white streaks
or dots) on the screen. This
is normal.
If the tape was originally
recorded
in SP or LP
mode, the still picture will be black and white in
addition to the "noise" lines.
This
is
not a
fault
of the
machine,
but
merely
a
by-product
of the technology
involved
in producing
a TV/VCR
with 2
video heads.
If it is left in the Pause mode for more than five
minutes,
the TV/VCR
will automatically
switch
to the Stop mode.
This feature
allows you to reposition
or reduce the
noise lines of a still picture.
Press the PAUSE/STILL
button so that the noise
lines change
position
on the screen
and you can
see the picture
in its entirety without
distracting
noise lines.
NOTE:
This feature can be activated
ONLY when
viewing a tape recorded
in the SLP mode. If the
tape was originally
recorded in the SP or LP mode,
the still picture may appear in black and white in
addition to the "noise bars". This is normal.
In the Pause/Still
mode only, when the picture
begins to vibrate vertically,
stabilize the picture
by
pressing
the CHANNEL
UPor
DOWN
button.
NOTE:
If there are video noise lines on the
screen,
reposition
or reduce them. Refer to
"Noise
line Reduction".
- 20
-
EN
9K16
Sample
This manual is suitable for devices