Philips CED780/51 user manual download (Page 12 of 41)

Languages: English
Pages:41
You can view the full version and download it in PDF format.
Page 12 of 41
13
English
EN
Connector
Connect to
4
Red wire
The +12V power terminal
which is live in the accessory
(ACC) position of the ignition
switch. If there is no accessory
position, connect to the
+12V car battery terminal
that is always live. Ensure that
black ground (earth) lead is
connected to a metal surface
´¿²º»¶²¹Àµ²Áµ½ºÄ
5
Green and
green/black
wires
Left speaker (Rear)
6
White and
white/black
wires
Left speaker (Front)
7
Gray and
gray/black
wires
Right speaker (Front)
8
Purple and
purple/
black
wires
Right speaker (Rear)
2
Connect the other end of the supplied
standard connector to the car audio
system.
Caution
±
To avoid any accident, the driver must not watch video
while driving. This unit is designed to not allow watching
moving video while driving. Park your car in a safe place
and engage the parking brake before watching moving
video.
Note
±
The video blocking system under parking brake not
engaged only control the display of this unit, and will
not affect the video output through the rear RCA
video output.
±
If watch moving video from disc or AV-IN source but
parking brake is not properly connected, the video
signal will be blocked by the system, and the below
display will be shown on TFT:
Sample