You can view the full version and download it in PDF format.
Page 32 of 38
TASCAM Tower CD Duplicator User’s Manual
Appendix B. LCD Messages
This appendix explains the messages that may appear on the LCD panel.
Normal Conditions (for all CD Duplicator models)
Initialize system memory.
Detect the drives connected to the system.
Cancel a job during operation.
Analyze the source disc.
Source Drive Not Ready
Source drive is not ready to be read.
Target Drive Not Ready
Target drive is not ready to be read.
The system is erasing the data on the disc.
Fail to get Drive Info!
Drive information cannot be obtained.
Fail to get SRC Disc Info!
Information about a source disc cannot be obtained.
Save new conﬁg Fail!
The new conﬁguration settings cannot be saved.
Load Default Conﬁg?
Do you want to load the default settings?
Src&Tgt can't in the same
During comparison, the source and target discs cannot
occupy the same channel.
The system is preparing to record.
Check Target Please Wait
The system is checking the target device.
Audio Disc!!!Can't compare!
The system cannot compare the audio disc.
Comparison results are identical.
Read disc error
During a comparison, the disc could not be read.
Cannot read TOC
The system cannot read the contents of the disc.
TOC not match
Comparison results are not identical.
Source Disc Empty!!!
The source disc contains no data.
The target disc capacity is insufﬁcient to store new data.
Target Disc Not Empty!!!
The target disc contains no data.
Press a Key to Eject Good Disc
Press any key to eject a good disc after copying.
Press a key to Eject Fail Disc
Press any key to eject a failed disc after copying
CD-RW does not Support the
CD-RW does not support this function.
Hold ESC to exit
Press ESC for one second to terminate the test.
All data will be lost, erase?
All data on the disc will be lost. Conﬁrm erasure request.
The erasing of the data is complete.
No Erasing to Disc in CD-RW!!
The disc on the CD-RW device is not rewritable.