You can view the full version and download it in PDF format.
Page 1 of 4
and thank you for your purchase of the Audio Note Conquerer stereo
power amplifier. The Conquerer is a Pure Class A stereo singled ended valve amplifier
that uses the highly regarded 300B directly heated triode valve. The Conquerer produces
a level of performance that is radically superior to current designs and was specifically
designed for sonic performance rather than technical specifications. It also fulfills all
Level 3 criteria.
-Pure Class A operation.
-Zero negative feedback.
-Single ended output stage.
-Directly heated Triode.
-Materials and component quality.
This Level 3 amplifier features Audio Note copper and silver wiring and Audio Note
UNPACKING AND INSTALLATION
This amplifiers is shipped without the valves installed. It is necessary to install the
valves first. It is
that the valves are installed correctly or
that is not covered by the warranty will result
. We recommend that your dealer does
this for you.
Installing the valves
Please take care when unpacking the amplifier as it is fairly heavy and place on a suitable
clean space (table or floor). We recommend that you store the packaging materials in
case the unit requires shipping at a later date.
Carefully unwrap all the valves. You will find 2 x 6SN7WGTA, 2 x 300B and 1 x 5U4G
Looking from the front of the amplifier, the first valves to plug in is the 6SN7WGTA
valves, which goes into the two valve bases at the front of the amplifier.
Inspect the locating pin on the bottom center of the valve and align with the valve base
(the locating pin can only go in one way round due to a locating spigot) and with gentle
but firm pressure insert the valves.
Looking from the front of the amplifier, the next valve to plug in is the 5U4G valve
which goes into the last valve base at the back of the amplifier.
This manual is suitable for devices