Amana NAV2330AWW Installation Instructions download

Languages: English
Manual type:Installation Instructions
Pages:6
Instant delivery to e-mail
You can buy the full version and download it in PDF format instantly.
Page 1 of 6
BUILT BETTER THAN IT HAS TO BE"
Installation
Instructions
Top
Loading
Washer
Keep
instructions
for
future
reference.
Be
sure
manual
stays
with
washer.
MOVE
WASHER
TO
FINAL
AREA;
REMOVE
SHIPPING
BRACE
&
PLUG
Protect
the floor
when
moving the
washer. Washer must be within 4 feet
of desired area before beginning
installation.
Open washer lid and
remove installation
parts from
shipping brace for use.
Reach through foam shipping
brace, grasp bottom of brace, and
pull up to remove.
i
NOTE:
Save shipping
plug and
shipping
brace; reinstall whenever
washer
is moved more than 4 feet.
Do not lift or move washer without
shipping materials
in place.
To remove the
shipping plug
from the
washer, step
on the card
board base,
tilt the washer back, and slide out the
base.
i
Cardboard
base
Shipping
brace
Shipping
plug
CONNECT
WATER
FILL
HOSES
TO
WASHER
Tightly push one flat rubber
washer into one end of each
water fill hose and attach this end
of hose to washer. HOT and
COLD connections
are identified
by letters
H and C stamped into
washer cabinet and by HOT and
COLD printed on water fill hoses.
In most cases, hoses should
cross when
attached
to correct
water temperature
faucet.
]]ghten
hose connections
by hand
until
snug, then
another ¼
turn
with
pliers. DO NOT cross-thread
or over-
tighten couplings.
end
of
fill hose.
Sample