Admiral AGD4475TQ1 Installation Instructions download (Page 2 of 20)

Languages: English
Manual type:Installation Instructions
Pages:20
Instant delivery to e-mail
You can buy the full version and download it in PDF format instantly.
Page 2 of 20
WARNING:
For your
safety,
the information
in this
manual
must
be followed
to minimize
the risk of
fire
or
explosion,
or to prevent
property
damage,
personal
injury,
or death.
- Do not store or use gasoline or other
flammable
vapors and liquids in the vicinity of this
or any other appliance.
- WHAT
TO DO IF YOU
SMELL
GAS:
Do not try to light any appliance.
Do not touch
any electrical
switch;
do not use any
phone
in your
building.
Clear
the room,
building,
or area
of all occupants.
Immediately
call
your
gas supplier
from
a neighbor's
phone.
Follow
the gas supplier's
instructions.
If you
cannot
reach
your
gas supplier,
call the
fire
department.
- Installation and service must be performed by a qualified installer, service agency, or
the gas supplier.
In the State of Massachusetts,
the following
installation
instructions
apply:
Installations
and repairs must be performed
by a qualified
or licensed contractor,
plumber,
or gasfitter
qualified
or licensed
by
the State of Massachusetts.
If using a ball valve,
it shall be a T-handle type.
A flexible
gas connector,
when used, must not exceed
3 feet.
iMPORTANT:
The gas installation
must conform
with local codes, or in the absence of local codes, with the National
Fuel Gas
Code, ANSI
Z223.1/NFPA
54 or the Canadian
Natural
Gas and Propane Installation
Code, CSA B149.1.
The dryer must be
electrically
grounded
in accordance
with local codes, or in the absence of local codes, with the National
Electrical Code, ANSI/NFPA
70 or Canadian
Electrical
Code, CSA C22.1.
INSTALLATION
INSTRUCTIONS
Gather the required tools and parts before starting installation.
Read and follow the instructions
provided
with any tools listed
here.
8" or 10" pipe wrench
8" or 10" adjustable
wrench (for gas
connections)
Flat-blade
screwdriver
Adjustable
wrench
that
opens to 1" (2.5 cm) or
hex-head
socket
wrench
(for adjusting
dryer feet)
1/4"nut driver or socket
wrench (recommended)
Level
Knife
Vent clamps
Pipe-joint
compound
resistant to LP gas
Caulking
gun and
compound
(for installing
new exhaust
vent)
Pliers
Tape measure
Parts
supplied:
Remove parts package from dryer drum. Check that all parts were
included.
4 leveling legs
Parts
needed:
Check local codes and consult
gas supplier. Check existing
gas
supply, electrical
supply
and venting,
and read "Electrical
Requirements,"
"Gas Supply Requirements"
and "Venting
Requirements"
before purchasing
parts.
Mobile home installations
require special
parts (listed following)
that may be ordered
by calling the dealer from whom you
purchased
your dryer. For further
information,
please reference
the front page of the Dryer User Instructions.
Mobile
Home Installation
Kit. Ask for Part Number 346764.
Metal exhaust
system hardware.
Sample