Sharp 14LT-45S Service Manual download (Page 3 of 12)

3

14LT-45S

ELECTRICAL SPECIFICATIONS

WARNING

The chassis in this receiver is partially hot. Use an isolation transformer between the line cord plug

and power receptacle, when servicing this chassis.

To prevent electric shock, do not remove cover. No user-serviceable parts inside. Refer servicing to

qualified service personnel.

Specifications are subject to change without prior notice.

•

Power Input

....................

220V-240 Volts AC 50 Hz

•

Power Consumption

Normal Operation (Method IEC60107)

..............

40 W

Stand-by Operation

..........................................

<

10

W

•

Audio Power Output Rating (MPO) / Impedance

Internal Speaker

................................

2.5 W, 16

Ω

•

Speakers

Speaker

....................................

7.2 mm Round

•

Convergence (Maximum Misconvergence)

•

Picture Intermediate frequency

L’

................................................

33.9MHz

L, B/G, D/K

..............................

38.9MHz

•

Sound

Carrier Trap

L’

................................................

40.4MHz

L, D/K

.........................................

32.4MHz

B/G

............................................

33.4MHz

•

Adjacent Sound Carrier Trap

L’

................................................

32.4MHz

L, D/K, B/G

................................

40.4MHz

•

Adjacent

Picture

Carrier Trap

L’

................................................

41.9MHz

L, D/K

......................................

30.9MHz

B/G

............................................

31.9MHz

•

Aerial Input Impedance

VHF/UHF

.................

75 ohm Unbalanced

•

Tuning Ranges

.....

48.25MHz thru 855.25 MHz

VHF: S1 - S41 CH (Hiperband)

E2 - E12 / F2 - F10

UHF: E21 - E69

•

White Level

Apply the rated voltage at the rated frequency to the TV set, while it is receiving full white pattern RF signal of 60

dB/μV from its RF input via the pattern generator.

Turn all picture controls to maximum value. Measure the colour temperatures at the center of the screen by

using the colour analyzer.

X=0.290 ± 0.015

Y=0.300 ± 0.015

MODEL

DESTINATION (Operation Manual Languages)

14LT45SIT:

Italiano

14LT45S:

Deutsch, Français, Nederlands.

14LT45SES:

Español, Português

AREA

14” -

17”

A

0.3

BC

0.8

DE

0.8

FGHJ

1.3

KLMN

1.0

F’G’H’J’

1.0

STUV

0.9