Kenwood RXD-M37-L Service Manual download (Page 2 of 20)

Languages: English
Manual type:Service Manual
Pages:20
Instant delivery to e-mail
You can buy the full version and download it in PDF format instantly.
Page 2 of 20
CONTENTS / ACCESSORIES / CAUTIONS
...............
2
EXTERNAL VIEW
........................................................
3
ADJUSTMENT
.............................................................
4
PC BOARD
..................................................................
8
SCHEMATIC DIAGRAM
............................................
12
EXPLODED VIEW
.....................................................
17
PARTS LIST
...............................................................
18
SPECIFICATIONS
..................................
BACK COVER
CAUTION
Be sure to adhere to the following, or proper
ventilation will be blocked causing damage
or fire hazard.
Do not place any objects impairing heat
radiation onto the top of the unit.
Leave some space around the unit (from the
largest outside dimension including
projection) equal to or greater than, shown
below.
Back panel : 10 cm
Top panel : 50 cm
Channel space switching
(except for the Europe and Australia)
The space between radio channels has been
set to the one that prevails in the area to which
the system is shipped.
However, if the curren
channel space setting does not match the
setting in the area where the system is to be
used, for instance when you move from area 1
or area 2 shown in the following table or vice
versa, proper reception of AM/FM broadcasts
cannot be expected.
In this case, change the
channel space setting for each AM and FM
broadcast in accordance with your area by
referring to the following table.
When the system is on, press
TUNER/band
button to select TUNER mode and waveband
of which you wish to set the channel space.
Then, while pressing
6
button, press
4
button to switch the channel space.
Area
U.S.A., Canada and
South American countries
CHANNEL
Space frequency
1
2
Other countries
FM: 100 kHz
AM: 10 kHz
FM: 50 kHz
AM: 9 kHz
CAUTION
Place the unit where the AC power cord can
be easily unplugged.
The power in this unit will not be completely
cut off from the AC wall outlet when the
power completely, unplug the AC power
cord from the AC wall outlet.
The marking of products using lasers
The marking this product has been classified as Class 1.
It means that there is no danger of hazardous radiation
outside the product.
Location: Bottom
CLASS 1 LASER PRODUCT
LASER KLASSE 1
APPAREIL A LASER DE CLASSE 1
LUOKAN 1 LASERLAITE
KLASS 1 LASERAPPARAT
Resetting the Microcomputer
The microcomputer may malfunction (unit can-
not be operated, or shows an erroneous dis-
play) if the power cord is unplugged while the
power is ON, or due to some other external
factor.
If this happens, execute the following
procedure to reset the microcomputer and
return the unit to its normal operating condition.
Plug in the AC power cord to the wall outlet,
and within 5 seconds, press and hold down
the
7
button and press CD button.
Please note that resetting the microcomputer
will clear the contents of the memory and
return the unit to the state it was in when it
left the factory.
Remote control unit (1)
(A70-1690-08): E
(A70-1691-08): MX
AM loop antenna (1)
(T90-0908-08)
ANT TERMI CVR
(F07-2029-08)
Batteries (R6/AA) (2)
AC plug adapter (1)
(E03-0115-05)
Use to adapt the plug on the power
cord to the shape of the wall outlet.
(Accessory only for regions where
use is necessary.)
(–)
RXD-M37
2
CONTENTS / ACCESSORIES / CAUTIONS
ACCESSORIES
CONTENTS
CAUTIONS
Sample
This manual is suitable for devices