Thermador MBEB01 Installation Instructions download (Page 3 of 44)

Languages: English
Manual type:Installation Instructions
Pages:44
Instant delivery to e-mail
You can buy the full version and download it in PDF format instantly.
Page 3 of 44
Safety
Important
Safety Instructions
READ
AND
SAVE
THESE
INSTRUCTIONS
APPLIANCE
HANDLING
SAFETY
SAFETY
CODES AND
STANDARDS
ELECTRIC
SAFETY
WARNING:
When properly cared for, your new appliance
has been designed to
be safe and reliable.
Read all instructions
carefully
before use.
These precautions
will reduce the risk of burns, electric shock, fire
and injury to persons. When using kitchen appliances,
basic safety
precautions
must be followed,
including those in the following
pages.
WARNING:
Do not repair or replace any part of the appliance unless specifically
recommended
in the manuals.
Improper
installation,
service or
maintenance
can cause injury or property damage.
Refer to this
manual for guidance.
All other servicing
should be done by a
qualified technician.
Hidden surfaces
may have sharp edges.
Use caution when reaching behind or
under appliance.
This appliance
complies with one or more of the following
Standards:
UL 858, The Standard for the Safety of Household
Electric
Ranges
UL 923, The Standard for the Safety of Microwave
Cooking Appliances
UL 507, The Standard for the Safety of Electric Fans
ANSI Z21.1, The American
National Standard for Household
Cooking Gas
Appliances
CAN/CSA-C22.2
No. 113-M1984 Fans and Ventilators
CAN/CSA-C22.2
No. 61-M89 Household
Cooking
Ranges
It is the responsibility
of the owner
and the installer to determine
if additional
requirements
and/or standards apply to specific installations.
Before you plug in an electrical
cord, be sure all controls are in the OFF position.
Do not plug the microwave
into the wall until after the installation
is complete.
This
is to prevent accidentally
turning the microwave
on during the installation.
For appliances
equipped with a cord and plug, do not cut or remove the ground
prong. It must be plugged into a matching grounding
type receptacle to avoid
electrical shock.
If there is any doubt as to whether the wall receptacle
is properly
grounded,
the customer
should have it checked by a qualified electrician.
If required by the National
Electrical
Code (or Canadian
Electrical Code), this
appliance must be installed on a separate
branch circuit.
Installer - show the owner the location of the circuit breaker or fuse. Mark it for
easy reference.
English 1
Sample
This manual is suitable for devices