Wilbur Curtis CBHVS Service Manual download (Page 5 of 16)

Languages: English
Manual type:Service Manual
Pages:16
Instant delivery to e-mail
You can buy the full version and download it in PDF format instantly.
Page 5 of 16
5
Tea Dilut. Time
Pre-infusion
Pulse Brew
Pre-Infusion
(Factory Disabled)
Press
to Select. Current setting in seconds is displayed < to decrease or select > to increase (range from OFF to 10
through 60 seconds),
to set.
If Pre-infusion is selected (ON), Cold Brew Lock is set to Delta 1 within 5ºF of set point and Cold Brew Lock disappears from the
list of program selections. When Pre-infusion is ON, Pulse Brew disappears from the list of program selections.
Pulse Brew
(Factory setting C)
Press
to select, < or > to select OFF or one of five pulse patterns (A to E) . The five Pulse Brew options help “tune” or change
the coffee flavor.
Guidelines for Pulse Brew:
Filter Pack type coffees typically extract better with the
A
and
B
pulse setting.
Decaf coffees typically extract better with the
B
pulse setting.
High-Yield coffees typically extract better with the
C
pulse setting. Of course, any of the
A, B
or
C
settings may be used to suit
your taste profile.
Settings
D
and
E
are manual pulse counts.
To exit from the Pulse Brew mode, select
0
for the time.
If Pulse Brew is on, Cold Brew Lock is set to Delta 1 within 5ºF of set point and Cold Brew Lock disappears from the list of
program selections. When Pulse Brew is on, Pre-infusion disappears from the list of program selections.
By-Pass
(Factory settings: LARGE 35%. MEDIUM 10%. SMALL Off.)
The By-Pass option helps with controlling extraction with larger brews. Contact time that is too long will extract undesirable bit
-
ter, harsh flavor compounds. By-passing some of the brew water around the coffee bed will balance the extraction.
Press
to display current setting. Press
< or > to
change settings; OFF, 5% to 50%, in 5% increments. Press
to set.
By-Pass
Tea Dilut. Delay
Tea By Volume
Tea By Time
Tea Dilut. Volume
Tea Pulse Brew
Sweetener Time
Select Button
– You may select a tea brew button to program from the buttons on the control module.
Tea by Volume
:
Press
to Select. The display will read Select Brew Button! Once the desired brew button is selected, the display will read
Press BREW to Start and hot water starts dispensing. When the desired volume is reached, press FULL BREW again to stop
the flow. The brew volume has now been set. When EXIT is displayed, Press
to select and exit.
Tea by Time
.
Press
to Select. Press < or > to increase or decrease time. Tea by Time has a range of 0:00 to 9:59 (Increments are minutes
and seconds). The HALF BREW button will be set at half the brew time.
Dilution Delay
Press
to Select. Press < or > to toggle between Standard-Gray (30 sec), Standard-Purple (30 sec), Tropical-Gray (9 min),
Tropical-Purple (9 min), 76/308-Gray (4 min) and 76/308-Purple (4 min). Range is from 0 seconds, 30 seconds to 10 minutes;
in 30 second increments.
Dilution Volume
Press
to Select, Display will now show Push START To Begin... Press the BREW button then water starts running, when de
-
sired volume is reached press BREW button again to stop the flow. Now the volume has been set. Pressing > button will display
the subsequent menu features.
Dilution Time
Press
to Select. Press < or > to toggle between Standard-Gray (4min-5sec), Standard-Purple (4min-5sec), Tropical-Gray
(4min-26sec), Tropical-Purple (4min-26sec), 76/308-Gray (4min-55sec) and 76/308-Purple (4min-55sec). Dilution Time is from
30 sec to 9 min, 59 sec.
Tea Pulse Brew
(Factory set to OFF).
Press
to Select, press < or > to choose ON, OFF, or D. Selecting ON will give a pulsing pattern of 1 to 20 pulses. In D, the
pulse time can be set for ON, 5 to 150 seconds (adjustable in 5 sec increments). Off time 5 to 150 seconds, adjustable in 5
second increments.
Sweetener Time
Sweetener Time is only for brewers with the optional tea sweetening system.
Press
to Select. Press < or > to toggle between minutes, seconds or exit. Pressing select
to choose minutes will increase
the minutes. Press
to add minutes. Press < or >
to move to seconds or exit.
Setting the time to zero (0) will disable the
Sweetener Time feature.
Select Button
This manual is suitable for devices