Univex CDR11 Service Manual download (Page 4 of 21)

Languages: English
Manual type:Service Manual
Pages:21
Instant delivery to e-mail
You can buy the full version and download it in PDF format instantly.
Page 4 of 21
A)
EMPLOYMENT OF TITE MACHTNE
The Dough Divider/Rounder CDR25 has been designed and
manufactured to make dough portions
and to round them (at room temperature).
Warning: Do not introduce into the machine frozen,
half-frozen dough, or other products
which are not foreseen in these instructions.
WORKING PLACES
The machine has to be placed
on a honzontal working plane as indicated on Drawing 1,
page 7, and
be used by a single person.
3, STARTING UP
3 i The machine is provided with three
single-phase motors and a NEMA plug.
Before connecting the machine, be
sure that the voltage and the frequency correspond to those
indicated on the machine data plate, and that
the intake is grounded and properly
protected from
overloading.
3.2 Once the machine is installed, be
sure that the Cover A (Drawing 1, Page 7), and the Side Chute
R
( Drawing i, Page 7) are correctly placed and
are working properly.
33 Be sure that the rounder is correctly
placed under the dough divider, otherwise the
machine
cannot start.
3.4 Furthermore, be sure that the Moveable
Doors BC (Drawing 1) are also closed, othenvise
the
machine cannot start.
3 5
Before working with the dough,
start the machine without dough in order to check
that
everything is in order.
16 To start the dough divider:
3.6.1 Turn on Switch D (Drawing
3, Page 9) to give current to the electrical circuits.
3.6.2 Push on the Button F (Drawing
3, Page 9), and the machine will start working.
3.6.3 Once the machine has finished
to work, or once you have finished trying it, turn the
Switch D (Drawing 3, Page 9)
on position O.
3.6.4 The Red Alarm Push Button
U (Drawing 2, Page 8) stops the machine.
It will then remain
blocked; to unlock it youjust need
to turn it counterclockwise.
3.7 To start the dough rounder:
3.7.1 Start the machine with the Switch
T on position 1 (Drawing 2, Page 8).
3.7.2 Once the machine has finished
to work, or once you have finished trying it, place
the Switch T on position O (Drawing
2, Page 8).
3.7.3 The Red Alarm Push Button
G (Drawing 3, Page 9) stops the machine.
It will
then remain blocked; to unblock
it you just need to turn it counterclockwise.
3
PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor
Sample
This manual is suitable for devices