Groen 161053 Service Manual download

Languages: English
Manual type:Service Manual
Pages:7
Instant delivery to e-mail
You can buy the full version and download it in PDF format instantly.
Page 1 of 7
159343 Rev. C
Page
1
I
NSTRUCTION
S
HEET
Intek Water Drain Kit
Installation Instructions
Introduction:
The 161053 Intek Water Drain Kit is shipped as a collection of parts that allows the steamer
reservoir drain and condensate drain to be directed to a floor drain through a high-temperature
rubber hose.
Assembly on site is required.
The instructions below will guide you through the
process.
All of the hardware required to assemble the hose and connect to the steamer is
included.
1.0
Unpacking
1.1
Remove all parts from the shipping carton.
WARNING
:
DISCONNECT ELECTRICAL POWER AND THE GAS LINE (IF USED)
FROM THE STEAMER BEFORE INSTALLING THE DRAIN KIT.
2.0
Verify Parts
2.1
Locate parts and verify the correct quantities listed below were included in the carton.
Check the packing materials for any missing parts.
ITEM
P/N
DESCRIPTION
QTY
UOM
1
099284
CLAMP HOSE WORM DRIVE
5
EA
2
127523
CLAMP, CONSTANT TENSION
2
EA
3
142262
ADAPTER, 1/2" FPT TO 3/8" BARB
1
EA
4
142548
1/2" NPT TO 3/4' BARB, 90 DEG ELBOW
1
EA
5
142549
3/4" HOSE BARB, 90 DEG. ELBOW
1
EA
6
143244
BRANCH TEE, 3/4" HOSE BARB TO 1/2" NPT
1
EA
7
143250
HOSE, 3/4" ID, 10 FT LONG
1
EA
8
143251
HOSE, 3/4" ID, 3.5-IN LONG
1
EA
9
143254
HOSE, 3/8" ID, 30-IN LONG
1
EA
10
158591
DRAIN PAN
1
EA
11
162992
10-24 SHOULDER SCREW, LOW PROFILE
2
EA
12
160133
HOSE, 3/4" ID, 7-IN LONG
1
EA
13
162993
ADAPTER, 3/8”FPT TO 3/8” BARB
1
EA
3.0
Water Drain Installation
3.1
Remove the right side panel from the steamer to provide access to the condensate drain
connection.
The condensate runs from the bottom of the copper condenser to a 90
degree barb elbow on the bottom of the steamer.
The elbow is secured to the bottom
with a nut.
Sample
This manual is suitable for devices