AIWA ADC-M65 YU Service Manual download (Page 4 of 6)

Manual type:Service Manual
Pages:6
Instant delivery to e-mail
You can buy the full version and download it in PDF format instantly.
Page 4 of 6
– 4 –
*
Connect wire for +12 V power to BACK UP of ICP601 by soldering.
*
Connect ICP601 and ACC pattern land by soldering a wire.
*
Connect GND by soldering a wire.
*
Connect the +12 V power to the ACC/BACK UP wire and connect ground (-) to the GROUND wire of the connector.
(Wires to be used for connection are not supplied.)
3)
Perform the operation check.
Refer to Fig-10.
The P.W.B KEY has the following pin assignment.
Fig-7
Fig-10
Fig-8
Fig-9
Sample
This manual is suitable for devices