Bosch HBL5351UC/01 Installation Instructions download (Page 4 of 37)

Languages: English
Manual type:Installation Instructions
Pages:37
Instant delivery to e-mail
You can buy the full version and download it in PDF format instantly.
Page 4 of 37
Preparation
Before You Begin
Tools
and
Parts Needed
Phillips head screwdriver
Star head screwdriver
(T20)
Measuring
tape
Drill with bit (1/8")
Parts
Included
Phillips head screws (6)
General Information
Power Requirements
The outlet must be properly grounded
in accordance
with
all applicable codes.
For Best Installation
The oven can be difficult for two people to handle during
installation.
It is recommended
to have three or more
people available to assist with lifting the unit into place.
Removal
of the bottom hinge oven door during installation
(to provide the necessary
handholds
and to significantly
reduce the unit weight)
can be cumbersome
unless the
detailed door removal instructions
are followed
carefully.
Note:
Do not attempt to remove the side hinge door (some
models).
Please take time to read and follow the instructions
provided for an improved
installation experience.
Use this checklist
to verify that you have completed
each
step of the installation process.
This can help you avoid
common
mistakes.
__
1.
Before installing the oven, be sure to verify the
cabinet dimensions
are correct for your unit and
the required electrical
connections
are present.
,
Refer to the installation
manual for content
regarding
Safety, Cabinet
Dimensions,
Removing
Packaging,
Electrical
Installation,
Testing the
Installation
and Customer
Service.
__
3.
Remove the oven door(s) to reduce the unit weight
and to provide access to handholds for lifting.
__
4.
Move the oven unit into place in front of the cabinet
opening, leaving the bottom packaging on the unit
to avoid damaging flooring.
__
5
Remove
the T20 screws
holding the unit to the
base of the carton (using Star-head screwdriver).
__
6.
If installing a combination
unit (oven and
microwave
or oven and steam oven) complete the
assembly
before installing the unit.
,
Team lift the unit directly
into the cabinet cutout
taking care not to pinch fingers or scratch hands or
arms. Make sure the electrical
conduit reaches to
the connection
point properly.
__
8.
Slide the unit all the way into place, making sure to
route the electrical
conduit correctly.
__
8.
Fasten the oven unit to the cabinetry opening with
the screws supplied (using Philips screwdriver).
__
10. Reinstall
the oven door(s)
removed
in step 2
above.
__
11. Consult the complete installation
instructions
and
follow the remainder
of the procedures
listed,
including performing
an operation
test.
__
12. All product literature
and accessories
(may be
wrapped or boxed) with the oven.
__
13. INSTALLER - Leave the literature
pack and the
accessories
with the customer.
English 2
Sample