Bosch HBL5351UC/01 Installation Instructions download (Page 3 of 37)

Languages: English
Manual type:Installation Instructions
Pages:37
Instant delivery to e-mail
You can buy the full version and download it in PDF format instantly.
Page 3 of 37
IMPORTANT
SAFETY
INSTRUCTIONS
READ
AND
SAVE
THESE
INSTRUCTIONS
Safety
WARNING:
If the information
in this manual is not followed
exactly, fire
or shock may result causing property damage or personal
injury.
WARNING:
Do not repair or replace any part of the appliance
unless
specifically
recommended
in the manuals.
Improper
installation,
service or maintenance
can cause injury or
property damage.
Refer to this manual for guidance.
All
servicing
should be done by a qualified technician.
Appliance
Handling
Safety
Do not lift appliance by door handle. Remove
the door for
easier handling
and installation.
See instructions
in Use
and Care Manual.
Unit is heavy and requires at least two people or proper
equipment
to move.
Hidden surfaces
may have sharp edges. Use caution when
reaching behind or under appliance.
Safety Codes and Standards
This appliance complies
with one or more of the following
Standards:
UL 858, Household
Electric Ranges
UL 923, Microwave
Cooking Appliances
UL 507, The Standard for the Safety of Electric
Fans
CAN/CSA-C22.2
No. 113-M1984 Fans and Ventilators
It is the responsibility
of the owner and the installer to
determine
if additional
requirements
and/or standards
apply to specific installations.
Electric Safety
Before you plug in an electrical
cord, be sure all controls
are in the OFF position.
If required
by the National
Electrical
Code (or Canadian
Electrical
Code), this appliance
must be installed on a
separate
branch circuit.
Installer
- show the owner the location of the circuit
breaker or fuse. Mark it for easy reference.
Important
- Save these instructions for the local electrical
inspector's
use.
Before installing, turn power OFF at the service panel. Lock
service
panel to prevent power from being turned ON
accidentally.
Refer to data plate for more information.
See "Data Plate"
under "Service"
for data plate location.
Be sure your appliance
is properly installed and grounded
by a qualified technician.
Installation,
electrical connections
and grounding
must comply with all applicable
codes.
Related Equipment
Safety
Remove all tape and packaging
before using the appliance.
Destroy the packaging
after unpacking
the appliance.
Never allow children to play with packaging
material.
Never modify or alter the construction
of the appliance.
For
example, do not remove leveling legs, panels, wire covers
or anti-tip brackets/screws.
Transport
To avoid damage to the oven vent, use the transport
method shown in the picture below.
Support the bottom of the oven from side to side when
moving it into the installation location.
Leave the unit
attached to the shipping pallet until it is in front of the oven
cavity, ready to lift into place.
English 1
Sample