Crosley CAE100MR12 Installation Instructions download

Languages: English
Manual type:Installation Instructions
Pages:4
Instant delivery to e-mail
You can buy the full version and download it in PDF format instantly.
Page 1 of 4
READ
BEFORE
INSTALLING
UNIT
Compact
Window
Mounting
(10,000-12,000
BTU)
The unit isfor window mounting only.
Carefully read the installation manual before beginning.
Follow each step as shown.
Observe all local, state, and national electrical codes and by qualified, licensed, authorized personnel only.
Pay attention to danger and safety notices.
To avoid risk of personal injury, property damage, or product damage due to the weight of this device and sharp edges that may
be exposed:
Air conditioners covered in this manual pose an excessive weight hazard. Two or more people are needed to move and install
the unit. Wear protective gloves whenever lifting or carrying the unit. AVOID the sharp metal fins of front and rear coils. To
prevent injury or strain, use proper lifting and carrying techniques when moving unit.
Carefully inspect location where air conditioner will be installed. Be sure it will support the weight of the unit overan extended
period of time.
Handle air conditioner with care.
Make sure air conditioner does not fall during installation.
SAVE CARTON
and these INSTALLATION
INSTRUCTIONS
for future reference.
The carton
is
the best way to store unit during winter,
or when
not
in use.
DO NOT USE ANY SCREWS
OTHER
THAN
THOSE
SPECIFIED
HERE.
WHERE
APPLICABLE,
THE TOP RAIL MUST BE
SECURELY
FASTENED
WITH ALL FOUR (4)
SCREWS
FOR SAFETY
REASONS.
The top rail on your
unit may already
be installed.
If not,
follow
the steps
below.
Top Rail Hardware
Qty.
3/8" Screw
4
Top Rail
Mounting
Hardware
Qty.
/
1/2" screws
7
/
_
#:%
lock frame
2
|
'%,_.
:
_
(For
Wooden
windows)
/
"
I
'"
lock frame
I
2
/
kr)
::::-_
(For
VinyFClad
windows)
/
_!_
%
sash lock
1
_%_
..............
LL_
weather
seals
5
/
_ _ _
......
(6"X 3/ 4"X l112")
I
',_
_:
window
sash seal foam
1
|
TOOLS
NEEDED
_, Philips
Screwdriver
Drill (If pilot holes are needed)
Before
installing,
the top rail must be assembled
on the unit.
A. Remove
the air conditioner
from the carton and place on a flat surface.
B. Remove
top rail from the rear of the packaging
material
as shown
in Fig. A
C. Align
the hole in the top rail with those on the top of the unit as shown
in Fig. B
D. Secure the top rail to the unit with the 3/8" Screws
as shown
in Fig. C
Top
Rail
Packaging
2020215A1036
Sample
This manual is suitable for devices