Crosley CAE08EHQ10 Installation Instructions download

Languages: English
Manual type:Installation Instructions
Pages:4
Instant delivery to e-mail
You can buy the full version and download it in PDF format instantly.
Page 1 of 4
READ
BEFORE
INSTALLING
UNIT
MSII
Window
Mounting
(5,000-8,000
BTU)
The unit is for window mounting only.
Carefully read the installation manual before beginning.
Follow each step as shown.
Observe all local, state, and national electrical codes and by qualified, licensed, authorized personnel only.
Pay attention to danger and safety notices.
To avoid risk of personal injury, property damage, or product damage due to the weight of this device and sharp edges that may
be exposed:
Air conditioners covered in this manual pose an excessive weight hazard. Two or more people are needed to move and install
the unit. Wear protective gloves whenever lifting or carrying the unit.AVOID the sharp metal fins of front and rear coils. To
prevent injury or strain, use proper lifting and carrying techniques when moving unit.
Carefully inspect location where air conditioner will be installed. Be sure it will support the weight of the unit overan extended
period
of time.
Handle
air conditioner
with
care.
Make
sure
air conditioner
does
not fall
during
installation.
SAVE CARTON
and these INSTALLATION
INSTRUCTIONS
for future
reference.
The carton is
the best way to store unit during winter,
or when
not
in use.
®
DO NOT USE ANY SCREWS
OTHER
THAN
THOSE
SPECIFIED
HERE.
FOR SAFETY
REASONS,
THE TOP RAIL MUST BE
SECURELY
FASTENED
WITH ALL FOUR (4)
SCREWS.
Some assembly
is required.
Please
read these instructions
carefully.
Top Rail Hardware
Qty.
3/8" Screw
4
Top Rail
1
Mounting
Hardware
1/2" screws
7
lock frame
2
(For
Wooden
windows)
lock frame
2
(For
Vinyl-Clad
windows)
j_
sash lock
t
weather
seals
5
(6"X3/4"X1112")
window
sash seal foam
1
TOOLS
NEEDED
®
Philips
Screwdriver
o
Drill (If pilot holes are needed)
Before
installing,
the top rail must be assembled
on the unit.
A. Remove
the air conditioner
from the carton
and place on a flat surface.
B. Remove
top rail from the rear of the packaging
material
as shown
in Fig. A
C. Align
the hole in the top rail with those on the top of the unit as shown
in Fig. B
D. Secure
the top rail to the unit with
the 318" Screws
as shown
in Fig. C
Fig.
B
Packac
_
[1
Rail
t Fig. C
2020211A2579
Sample
This manual is suitable for devices